高功率倍频器
MODEL EAMKa-28-SH
Input Frequency: 13.25 to 20 GHz
Input Power: +5dBm (Typical)
Output Frequency: 26.5 to 40 GHz
Output Power: 23 dBm (Min)
Spurious and Harmonics: -20 dBc (Max)
Bias: +8 V/750 mA (Typ)
Input Connector: K(F)
Output Connector: K(F) or WR-28 Waveguide with UG599/U Flange
MODEL EME-ADA-1020 / EME-AQA-0510
Input Frequency: 10 to 20 / 5 to 10 GHz
Input Power: +5dBm (Typical)
Output Frequency: 20 to 40 GHz
Output Power: 19 dBm typ,17dBm min / 19 dBm typ,13dBm min
Spurious and Harmonics: -20 dBc (Max)
Bias: +/-5V
Input Connector: K(F)
Output Connector: K(F)
MODEL EAMW94-2-SH
Center Frequency: 94 GHz(92-96GHz)
Injection-Locking bandwidth: ±1 GHz(min)
Input Frequency: 7.23 ±0.077GHz
Input Power: +7 dBm (min)
Saturated Output Power: 22dBm(158mW Max.)
Operating Voltage/Current: +27±0.5V/0.25A
Output Isolator: integrated
Input Connector: SMA-F
Output Connector: WR-10/UG-387/U-M
MODEL EAMW95-10-H
Input Frequency: 12.85 - 14.28 GHz（option）
Input Power: 10 to 17dBm
Output Frequency: 90 - 100 GHz
Output Power: 5 - 50mW
Multiplication factor: 7
Consumed power: 8 W
Input connector: SMA
Output connector: WR-10/UG-387/U-M
MODEL EAMW96-8-H
Input Frequency: 15.333 – 16.667GHz
Input Power: +5dBm (Min) and +10 dBm (Nominal)
Output Frequency: 96.0 +/-2.0 GHz (Min)(91.998-100.002GHz)
Output Power: +8 dBm (Min)
Harmonics Suppression: 20 dB (Typ)
Bias: +8 V/750 mA (Typ)
Input Connector : SMA (F)
Output Waveguide: WR-10 with UG387/U Mod Flange
高功率MMIC放大器及开关（有最小定货要求）
37-40GHz MMIC Ka-band Power Amplifier
Freq: 37 – 40 GHz
Gain: 16 dB typ.
P1dB: 33 dBm typ
RF Input and Output Internally Matched to 50 Ohms
DC bias: ≤10VDC
33-36GHz MMIC Ka-band Power Amplifier
Freq: 33 – 36 GHz
Gain: 16 dB typ.
P1dB: 33 dBm typ
RF Input and Output Internally Matched to 50 Ohms
DC bias: ≤10VDC
26-40GHz MMIC Low Noise Amplifier
RF frequency: 26 to 40 GHz
Noise figure: <2.1 dB
Linear gain: >17 dB
P1dB: 11 dBm, typical
Unconditionally stable
Self-bias design (single supply)
DC bias:≤ 10VDC
18-40GHz SPST Pin Switch Broad Bandwidth
Low Loss, < 1 dB max.
High Isolation, > 37 dB
Excellent Return Loss, < -13 dB
Fast Switching Speed, <5 ns
High Power Handling, 37 dBm Peak,33 dBm CW
Self-bias design on-chip(inductor,capacitor on-chip)
DC bias:≤5VDC
26-45GHz SPDT(Single pole double throw) Switch
Broad Bandwidth, 26-45 GHz
Low Loss, < 1.3dB
High Isolation, > 30 dB typical
Fast Switching Speed, < 5 ns
High Power Handling, 37 dBm Peak,33 dBm CW
Self-bias design on-chip(inductor,capacitor on-chip)
DC bias:≤5VDC
高功率固态放大器模块（有最小定货要求）
37-38GHz Ka-band Power Amplifier Module
Freq.: 37–38GHz
Gain: 15,20,30,40,60dB min option
Flattness: +/- 1dB
P1dB: 37dBm Min
NF: 9dB typ.
VSWR: 2:1 max
Voltage: 15VDC / 20A
Connector: WR28(K type as requested)
33.5-34.8GHz Ka-band Power Amplifier Module
Freq.: 33.5–34.8GHz
Gain: 15,20,30,40,60dB min option
Flattness: +/- 1dB
P1dB: 37dBm Min
NF: 9dB typ.
VSWR: 2:1 max
Voltage: 15VDC / 20A
Connector: WR28(K type as requested)
34.5-35.5GHz Ka-band Power Amplifier Module
Freq.: 34.5–35.5GHz
Gain: 15,20,30,40,60dB min option
G. Flattness: +/- 1dB
P1dB: 37dBm Min
NF: 9dB typ.
VSWR: 2:1 max
Voltage: 15VDC / 20A
Connector: WR28(K type as requested)
High Power CW / Pulsed IMPATT Amplifier Series
Freq.: 33-37/43-47/58-62/92-96/12-140GHz
Bandwith: up to 2GHz depending on numbers of stages
Pulse width: CW
long pulse 1us-1ms/0-50% duty
short pulse 50ns-1us/0-0.5% duty
Power output: 0.1 to 1W @CW
0.2-1.0W @long pulse
3,5,10,15,20W@short pulse
Wavegude size: WR-28/WR-22/WR-15/WR-10/WR-08
* 可提供1-50W CW, K to Ka-Band 固态宽带高功率放大器模块,请联络